|
Post by jts on Oct 8, 2006 12:26:25 GMT -5
Hey, I'm from ASR heres my idea for a gbb gun(the killzone gun) there will be a colman propane tank attahced to the gun, the trigger is a gass shut off valve the gbb system, works like this on full auto 1the gas enters and pushes the bb out of the chameber and the piston travels back 2 as the piston travels back, it will lose velocity as the gas escapes though the magazine 3 the bolt will slow to a stop, and the mag(yellow) will introduce a new bb 4 as the bolt travels foward the hole in th mag will prevent the bolt form traveling backward until it reaches the end of the chamber and the gas tube is fully engaged and the mag hole is disegaged and the gas cannot escape? will it work? plans please, i need advise updated bolt PS, i will make you a better web or forum layout if you want
|
|
|
Post by Creative Airsoft on Oct 10, 2006 21:00:47 GMT -5
Ok, First question you asked. "Will it work?" yes, i will work if everything is correctly connected. keep in mind, if it is not hooked up right you will have leaks and a serious cool-down effect therefore screwing up the action of your rifle. And if you want to give the forum colors a try, go for it. Im sick of this one.
Thanks and Cool gun,
Gino M. CA Team Leader
|
|
hudabon
Private
"Im Your Huckleberry"
Posts: 17
|
Post by hudabon on Oct 15, 2006 11:48:35 GMT -5
You could also try the idea of using a vortex block and rigging that up to an HPA tank, that might be eaiser to produce and get better results.
|
|
|
Post by Creative Airsoft on Oct 15, 2006 12:11:08 GMT -5
thats true..i HAVE experience with vortex blocks and they work great for me. but i think he is going for a gas blowback look.
|
|
hudabon
Private
"Im Your Huckleberry"
Posts: 17
|
Post by hudabon on Oct 15, 2006 12:35:17 GMT -5
It just seems as though that system is very complex...where will the blowback system work? Will some gas be used to open an ejection port or something? If you can actually build a stock around the tank, I think that would look better. Alot of airsofters shun classics and air tank rigged guns because of the visible tanks on the back.
|
|
|
Post by jts on Oct 17, 2006 19:38:46 GMT -5
the tank will look like a semi transparent helical magazine
I am still woking on a mag
I will use teflon tape to seal it
I might do a test with a springer m4 and make an m4 with an external tank before tackling the design above, because working out a mag and mag well is the hardest thing
|
|
|
Post by Creative Airsoft on Oct 17, 2006 20:07:18 GMT -5
yeahzorz.
|
|
Specter
Corporal
The Walking Armory
Posts: 60
|
Post by Specter on Oct 18, 2006 18:45:54 GMT -5
You could always try fabricating your own BV unit...
|
|
|
Post by Creative Airsoft on Oct 19, 2006 21:18:12 GMT -5
true.
|
|
|
Post by akimbros on Oct 19, 2006 21:33:35 GMT -5
Gino, tell me exactly what a BV system is.
|
|